UniqueKiosk · Shenzhen workshop

Curved Food Cart in White With Lift Canopy

$4,200.00

White moulded food cart with a lift canopy, warm LED bar and a stainless deck, sized 2.2 x 1.1 m for mall forecourts. Price range: USD 2,000-6,600, set by size and shell work.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Curved Shell and Canopy

A moulded shell forms the body of this food cart. Panels are 2 mm composite, bent to a 300 mm radius at every corner. The lift canopy raises on a curved arm and stays open on a latch. Inside the canopy, a warm orange panel holds an LED bar at 3000 K. The canopy spans 2.2 m over the deck. Closed, the arm folds flat against the body. This food cart reads as one smooth block from the front. The food and drinks forecourt at a mall fits this size.

white curved food cart

Stainless Deck

A stainless deck sits under the canopy of this food cart. The deck measures 1,200 mm by 700 mm at 950 mm height. A back shelf holds jars and tins on two lines. The deck has a small sink cut at the left for a rinse. Edges are folded, so no water runs to the body. A drip tray sits under the sink. Staff work from one side, facing the queue. Every food cart we build keeps the deck clear of the canopy arm.

food cart front view

Wheels and Road Use

Two 300 mm wheels carry this food cart at the rear, with castors at the front. Wheels are solid rubber with aluminium hubs and a brake. Castors are 100 mm for kerbs and ramps. A hand bar sits at the rear for pushing. Body weight lands near 180 kg empty. The length is 2.2 m and the width 1.1 m. display cases glass can drop into the canopy gap if a shop wants a cover. This food cart needs two people on a slope.

food cart side view

Build and Finish

Composite panels are cut on a CNC table, then bent and joined with a structural adhesive. Joints get a filler pass and a matte coat. The canopy arm is welded tube with a sealed bearing. LED bars are tested for colour match across the run. Every food cart is assembled and pushed on a test floor. cash counter counters use the same shell radius. countertop cases cases fit the side shelf for cold items.

deck shelf and canopy

Setup and Use

Setup takes two people about 25 minutes. Push the cart to the spot, brake the wheels, lift the canopy and lock the arm. LED bars run on a 24 V driver inside the body. A 16 A supply handles lights and a small appliance. The footprint is 2.2 m by 1.1 m with the canopy up. Clean down takes a cloth and a deck rinse. retail display fixtures spacing rules keep a clear path at each side. This food cart suits a paved forecourt.

Price and Custom Build

A smooth shell hides gas lines and stock behind one clean face. The lift canopy gives shade without a full roof frame. A warm LED bar makes the deck the bright point at night. List price starts at USD 4,200 for the 2.2 m build. A shorter cart at 1.8 m with no canopy lands near USD 3,100. ukiosks builds this food cart to order in Shenzhen. We can reset shell length, radius, canopy span and panel colour. Send your plan and we return drawings and a quote. Nearby food and drinks kiosks and coffee fit-outs counters share the same shell line.

Specification Detail
Overall size 2.2 x 1.1 x 2.0 m (custom 1.8-3.0 m)
Shell 2 mm composite panels, 300 mm radius
Deck Stainless deck 1,200 x 700 mm, small sink
Canopy Lift arm with latch, 2.2 m span
Lighting LED bar at 3000 K, 24 V driver
Wheels Two 300 mm wheels, two 100 mm castors
Packing Two crates, about 180 kg

Reviews

There are no reviews yet.

Be the first to review “Curved Food Cart in White With Lift Canopy”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop