UniqueKiosk · Shenzhen workshop

Street Cart in Stainless With Roof and Glass Case

$2,600.00

Stainless food cart with a sloped roof canopy, four castors and an upright glass case on the counter, sized 1.4 x 0.8 m. Price range: USD 2,000-6,600, set by size and case type.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Roof Canopy on Posts

A sloped stainless roof covers this food cart at 2.0 m. The canopy is made from folded sheet on a 20 mm frame, with four round posts. Posts bolt to the body through steel plates. The roof sheds rain to the back, away from the counter. Two lantern holders sit on the post tops. Shade keeps cakes and ice from melting in the sun. Every food cart we build for open streets uses a sloped roof. The food and drinks pitch at a festival gets the same shade line.

stainless street cart

Counter and Glass Case

The counter top of this food cart runs 1.4 m by 0.8 m at 900 mm. A stainless top sits over a ply core, with folded edges. An upright glass case stands on the right end, 350 mm wide and 700 mm tall. The case has one shelf and a glass door with a latch. Glass is 4 mm tempered, framed in stainless angle. Small items stay in view at eye height. display cases counters with a flat front show less at this size.

street cart front view

Body and Drawers

A wide drawer sits under the counter of this food cart. The drawer runs 900 mm wide on steel slides, rated for 40 kg. Two cabinet doors sit below, with magnetic catches. Body panels are 0.9 mm 304 stainless on a 25 mm frame. Corners are welded and ground smooth. Staff store gas, cloths and stock inside the body. This food cart keeps a clear service face with no clutter. cash counter drawers use the same slide set.

street cart side view

Build and Finish

Sheets are sheared, folded and spot welded to frame tubes. Weld marks get a grind and a brush pass. Roof seams are sealed with a silicone bead. Drawers are squared on a jig, so they pull straight after years of use. Every food cart is assembled and pushed on a test floor before crating. countertop cases cases can replace the upright case. coffee fit-outs fit outs take the same body frame.

glass case on counter

Moving and Setup

Four castors carry this food cart, two with brakes. Wheels are 100 mm, so the body clears a kerb lip. One person can push the cart with the roof fitted. Setup takes about 10 minutes for posts and brakes. Body weight lands near 85 kg empty. Power is not needed unless lanterns are wired. retail display fixtures spacing rules keep a 500 mm gap at the wheels. This food cart fits a 1.6 m bay.

Price and Custom Build

A roof makes a cart usable in rain and sun without a tent. A drawer under the counter keeps small stock within reach. The upright case sells cakes and snacks at eye height. List price starts at USD 2,600 for the 1.4 m build. A cart without the roof and case lands near USD 1,900. ukiosks builds this food cart to order in Shenzhen. We can reset body length, roof slope, case size and drawer count. Send your plan and we return drawings and a quote. Nearby food and drinks kiosks and countertop cases cases share the same frame.

Specification Detail
Overall size 1.4 x 0.8 x 2.0 m (custom 1.2-2.2 m)
Body 0.9 mm 304 stainless on 25 mm frame
Roof Folded stainless canopy on four posts
Glass case 350 x 700 mm, one shelf, glass door
Drawer 900 mm, steel slides, 40 kg rating
Wheels Four 100 mm castors, two with brakes
Packing One crate, about 85 kg

Reviews

There are no reviews yet.

Be the first to review “Street Cart in Stainless With Roof and Glass Case”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop