UniqueKiosk · Shenzhen workshop

Snack Cart in Stainless With Red Awning and Glass Front

$2,800.00

Stainless food cart with a red scalloped awning, a full glass front counter and lattice rail, sized 1.8 x 1.0 m for market pitches. Price range: USD 2,000-6,600, set by size and glass work.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Front Counter

A glass front panel covers the whole service face of this food cart. The panel is 1,800 mm long and 600 mm tall, set in a stainless frame. Glass is 5 mm tempered with a polished edge. A stainless lattice rail runs above the panel at 100 mm spacing. Stock stays visible behind the glass all day. The lower cabinet holds gas, cloths and stock. Buyers read the shelf through the glass without asking. Every food cart we build can take this glass line.

stainless snack cart

Awning and Frame

A red and white scalloped awning tops this food cart. The frame is welded 25 mm stainless tube, braced at the corners. Awning height sits at 1,950 mm, clear of a tall person. The top deck is open, so steam leaves the cooking zone. A folded side shelf drops on the left for bags. The body measures 1.8 m by 1.0 m and stands on two green wheels. This food cart reads bright from across a market aisle. The food and drinks stand at an event uses the same size.

snack cart front view

Wheels and Moving

Two rubber wheels at the rear carry this food cart, with a castor pair at the front. Wheels are 250 mm with sealed bearings and green painted hubs. A push handle sits at the rear, 900 mm high. The cart moves on level ground by one person. Screw legs drop to level the body on kerbs. Empty weight lands near 95 kg. display cases cases can sit on the counter if a shop needs a cover. Locking castors keep the frame steady.

snack cart side view

Build and Finishing

Frame tubes are cut on a saw, then welded and cleaned. Weld seams get a brush pass, then a clear coat. Glass panels are glazed in the shop with a rubber gasket. Lattice rails are welded bar stock, spaced by a jig. Every food cart is squared on a table before crating. Cabinet decks are 18 mm ply with a stainless skin. cash counter counters use the same glass gasket set. countertop cases glass tops can replace one cabinet bay.

glass front and rail

Site Use

Setup takes two people and about 15 minutes. Push the cart in, lock the castors, drop the legs. Cooking gear sits on the deck behind the glass line. Power is not needed unless lights are added. The footprint is 1.8 m by 1.0 m with shelves folded. A cloth and water clean the glass each shift. retail display fixtures rules on pitch width keep a 600 mm gap at the wheels. This food cart fits a 2 m bay.

Price and Custom Build

Glass across the full front sells faster than a shut cabinet. The lattice rail keeps the glass line strong at trolley height. Red awning colour tells buyers where the queue starts. List price starts at USD 2,800 for the 1.8 m build. A cart without the full glass front lands near USD 2,100. ukiosks builds this food cart to order in Shenzhen. We can reset body size, glass height, rail spacing and awning colour. Send your plan and we return drawings and a quote. Nearby coffee fit-outs counters and food and drinks kiosks use the same tube frame.

Specification Detail
Overall size 1.8 x 1.0 x 2.0 m (custom 1.5-2.6 m)
Frame 25 mm stainless tube, welded
Glass front 5 mm tempered panel, 1,800 mm long
Rail Stainless lattice, 100 mm spacing
Awning Scalloped fabric on steel frame
Wheels Two 250 mm wheels, two castors
Packing One crate, about 95 kg

Reviews

There are no reviews yet.

Be the first to review “Snack Cart in Stainless With Red Awning and Glass Front”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop