UniqueKiosk · Shenzhen workshop

Bakery Kiosk in Oak With Curved Glass Cases and Brick Towers

$12,800.00

Oak clad bakery kiosk with two curved glass cases, brick corner light towers and a steel base, sized 3.5 x 2.4 m for mall plots. Price range: USD 9,000-15,000, set by size and case count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Oak Clad Counter Body

Light oak planks clad the body of this bakery kiosk. Boards run horizontally, 120 mm wide, with a 6 mm reveal between courses. The body sits on a stainless steel base frame, 120 mm high. That base keeps mops and spills off the timber. Panels are 18 mm ply behind the oak face. Two brick clad towers rise 900 mm above the counter line. Each tower holds a round light opening with no lettering. A bakery kiosk built this way reads warm from 20 m away. The food and drinks aisle suits this mixed oak and brick face.

oak bakery kiosk

Curved Glass Cases

Two curved glass cases sit on the counter deck. Each case is 1,800 mm long with two glass shelves. A curved front panel sends light back onto the trays. Frames are aluminium with a dark powder coat. Glass is 5 mm tempered and curved in one piece. Trays sit on the lower shelf, whole loaves on the top. This bakery kiosk keeps bread covered but visible. display cases of the same shape take the same shelf pins.

bakery kiosk front view

Towers and Work Deck

The brick towers carry the light and the brand face. Openings are lit from behind with a diffuser panel. The counter deck between cases is 400 mm deep, for tongs and bags. A register sits at the right end of this bakery kiosk, level with the deck. Cash and bags go into a locked drawer under the deck. Staff work from the inner side, out of the aisle. A bakery kiosk with a clear deck moves a queue faster.

bakery kiosk right side

Build and Finishing

Carcass boards are 18 mm ply with a moisture resistant core. Oak faces are veneered and sealed twice, so crumbs wipe off. Steel base frames are welded and coated matte. Brick towers use a thin brick panel, fixed to a ply core. Nothing is glued where a bolt will do. Every bakery kiosk gets a dry fit in the workshop first. cash counter sections share the same bolt spacing. Cases arrive boxed and are set after the body is joined.

glass case bread trays

Plot and Delivery

The plan measures 3.5 m by 2.4 m, with a top height of 950 mm. It suits mall plots from 14 to 20 sqm with a queue strip. Weight lands near 480 kg across five crates. Long runs ship in two halves, joined on site with a seam trim. Site work on this bakery kiosk is bolting bodies, then setting cases and lights. A crew of three needs two days. One 16 A circuit runs the case lights and tower panels. countertop cases cases can sit on the deck as extras.

Price and Custom Build

Oak faces age better than gloss, and they hide daily marks. Two curved cases sell more bread than one long flat case. Brick towers make a small unit look built in. List price starts at USD 12,800 for the 3.5 m build. A 2.6 m version lands near USD 10,600. ukiosks builds this bakery kiosk to order in Shenzhen. We can change tower height, oak tone, case length and light colour. Send your plan and we return drawings, sections and a quote. Nearby retail display fixtures counters and coffee fit-outs fronts use the same base frame.

Specification Detail
Overall size 3.5 x 2.4 x 0.95 m (custom 2.6-4.2 m)
Body Oak veneer on 18 mm plywood
Base Stainless steel frame, 120 mm
Display cases Two curved glass cases, 1,800 mm each
Glass 5 mm tempered curved glass
Lighting Backlit tower panels and case LEDs, 220 V
Packing Five crates, about 480 kg

Reviews

There are no reviews yet.

Be the first to review “Bakery Kiosk in Oak With Curved Glass Cases and Brick Towers”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop