UniqueKiosk · Shenzhen workshop
Anthracite Steel Half-Circle Rack Extender for Salesman Rolling Rack, 6 Inch Rise
$13.92
Anthracite powder-coated steel half-circle rack extender with two curved arms, raising the top bar about 6 inches and adding roughly 34 inches of hanging space to a salesman rolling rack.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Steel Extender Build
This half-circle extender is welded from steel round tube. It mounts onto a salesman rack vertical post. The half-circle extender uses two curved arms at separate levels. Each arm ends in a smooth capped tube tip. The steel frame holds garments without bending under load. Browse the full shop collection for rack mounting parts. This half-circle extender fits standard round-tube rack posts. Buyers can add it to an existing rolling rack frame.
Anthracite Powder Coat
The half-circle extender carries an anthracite dark gray powder coat. The matte surface resists scratches and daily handling marks. This half-circle extender keeps a clean look in modern stores. The coat covers arms, post stub and welded joints evenly. Dark gray pairs with black and chrome rack units alike. Compare it with our 4-way black slant-arm boutique rack. This half-circle extender hides light fingerprints well.
Raised Top Bar Height
The half-circle extender raises the top bar by about 6 inches. This half-circle extender adds roughly 34 inches of hanging space. The extra length holds extra garments during busy sales periods. The upper arm sits clear of the lower rack rail. Taller items gain headroom on the raised section. The curved form spreads hangers apart along the arc. Store teams gain more display room without a second rack unit.
Rolling Rack Use
This half-circle extender suits salesman racks and rolling clothing racks. It adds side hanging space next to the main rack bar. The arms hold tops, dresses, jackets and light outerwear. It pairs with our 2-way straight-arm chrome clothing rack for aisle displays. The 2-way slant-arm chrome clothing rack shares the same tube size. Explore the 2-way and 4-way clothing rack category for full units. This half-circle extender also works in pop-up and showroom setups.
Mounting And Fit
Fitting this half-circle extender uses the rack’s existing post. Slide the post stub over the rack’s vertical tube. Level the arms before tightening the fixing points. The welded collar sits firmly against the main post. Each half-circle extender can be removed or repositioned later. Wipe the coated surface with a soft dry cloth. The waterfall-arm adjustable rack accepts matching round-tube parts.
Overall Product Advantages
On balance, this half-circle extender gives practical extra capacity. Its steel body and dark coat support everyday retail use. The 6 inch rise and 34 inch added space solve crowded rails. It fits standard salesman and rolling rack frames. Ukiosks can customize this half-circle extender to your post size and finish. Share your rack layout and custom requirements with our team. We can adjust arm length and coating to your store design.
| Parameter | Details |
|---|---|
| Material | Steel tube, welded joints |
| Finish | Anthracite powder-coated |
| Height Rise | Approx. 6 inches |
| Added Hanging Space | Approx. 34 inches |
| Arm Shape | Two-tier half-circle arc |
| Mounting | Salesman rolling rack post |
| Typical Use | Extra clothing hanging space |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.