UniqueKiosk · Shenzhen workshop

Round Watch Display Counter with Four Glass Boxes, 1000 mm

$1,250.00

A round watch display counter with four brass framed glass boxes on a white body. Price range: USD 700-1,500, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four Boxes on a Round Top

This watch display counter sets four glass boxes on a round top. Each box has a brass frame and a clear lid. A customer can look down at a watch without opening a door. The round body carries a brass band at the apron line. Four slim legs lift the counter, and a white cylinder under the top gives stock space. The unit is 1000 mm across and 950 mm tall. A watch display counter like this lets a salesperson stand on all four sides. The round plan suits a small watch bay or a shop island. The top ring is 1000 mm across.

Body and Box Build

The top is 25 mm MDF with a white lacquer and a brass edge band. Boxes use 5 mm tempered glass with brass tube frames and a bevelled lid. The apron hides a small drawer for cloths. Legs are 30 mm steel with a white coat and brass feet. The cylinder is 18 mm board with a laminate face. Weight is 74 kg. Every watch display counter is levelled on a jig before the boxes are set, so the lids close clean. Each box holds 6 watches.

Island Placement

Set the counter clear of a wall, so staff can walk round it. Keep 900 mm of aisle on the busiest side. Put the top brand pieces in the two boxes facing the entrance. Use the cylinder for boxes and pouches. A watch display counter also works in a jewellery shop or a hotel lobby. Two counters make a small island. Compare display cases cases or jewelry displays trays. A watch display counter suits a 1 m island slot.

Specification Detail
Diameter 1000 mm, height 950 mm
Top 25 mm MDF, white lacquer
Boxes 4, 5 mm tempered glass
Frames brass tube, bevelled lid
Legs 30 mm steel, brass feet
Box load 6 watches each
Weight 74 kg

Load and Lock

Each box takes 6 watches on cushions, so a full counter shows 24 pieces. The brass lid carries a small cam lock, and one key covers the box. A watch display counter at 74 kg stands steady, but a floor anchor helps in a busy mall. Wipe the white top with a damp cloth and glass with a non ammonia spray. Check the lid hinges each month. store operations teams count pieces at open and close. One watch display counter holds 24 watches.

Delivery and Setup

The counter ships in three cartons: body, boxes and cylinder. Two people set it up in about 45 minutes. Stand the body, fit the cylinder, level the legs, then set the boxes on the top. Weight is 74 kg. Lift the top with two people, not one. Keep the boxes wrapped until the body is level. retail displays covers pieces beside the island.

Cost and Custom Build

A round top lets a customer walk round the stock. Four glass boxes show 24 watches at eye level. Brass frames mark the top pieces. The cylinder hides boxes and pouches. One key covers each box. List price starts at USD 1,250 for the 1000 mm counter. Ukiosks builds this watch display counter in any diameter, box count and finish. Our team quotes from a shop plan. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Round Watch Display Counter with Four Glass Boxes, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop